Filtered,Oil Free 4kg/cm2 provided by customer only
Filling Accuracy
Filling Accuracy more than 1%
Brand
LODHA
Material Grade
SS 316 & SS 304
Weight
350 Kilograms
Servo Based Vial Dry Powder Filling Stoppering Machine is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Powders are made from Ss316 Materials. The Machine is equipped with Single Head Single Track Eight Port Powder wheel, which works on Vacuum and Air Systems to Fill powder in Vials, with on-line Vibrator type Rubber Stoppering system, The stopper inserting system operates in a continuous mode with synchronized speed of machine.
Vial Powder Filling and Stoppering Machine Special Features:
No Vial - No Fill System
cGMp compliance system for AutoClaving/Sterilization
Machine construction in SS304 material
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantling for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
No Stopper - Machine Stop System
Low Air - Machine Stop System
Low Vacuum - Machine Stop System
Specifications:
Model No.
LI-PVF 4
Vial Diameter
25mm to 38mm
Vial Height
75mm Max.
Rubber Stopper Diameter
20mm
Filling Range
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Accuracy
+/- 1% Depending upon the Powder, under the controlled level of Humidity
Humidity
Below 30% Rh
Electrical
415VAC 3Phase and 220 VAC, 50 Hz
Power
2.0 H.P.
Compressed Air
Filtered, Oil Free 4kg/cm2 provided by customer only
Aseptic Powder Filling Machine to fill injectable powder into vials. The precision built welded steel frame is encompassed with stainless steel sheets with access doors for servicing the machine. All parts coming in contact with container, powder and rubber stopper made of stainless steel 316 for long life of equipment and as per cGMP standard requirements. Features: cGMP model“No Vial - No Filling” system eliminates wastage of costly powderMultiple Dosing mechanismHigh Volumetric Filling Accuracy of ±1% of uniform density Injectable powder can be ensured by setting the depth of piston in the port of powder wheelBuilt-in Rubber Stoppering Unit saves lot of space in the Sterile Area & reduces the length of Laminar FlowIndividual drive for the filling & sealing to match the speed of filling & sealingAll motors are provided with appropriate contractors and relays for the protection against any overload or jammingSafety clutch system to avoid Vial breakageVariable Frequency Drive for speed controlAll contact parts are easily removable for mandatory Autoclaving/ SterilizationDigital counter for counting production output Working Process: Sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density of powder. The powder wheel having eight ports rotates at the pre determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided there is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked in to the port of powder wheel during vacuum according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade.
Technical Specification
Model No.
LI-PVF 4
Vial Diameter
25mm to 38mm
Vial Height
75mm Max.
Rubber Stopper Diameter
20mm
Filling Range
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Accuracy
+/- 1% Depending upon the Powder, under the controlled level of Humidity
Humidity
Below 30% Rh
Electrical
415VAC 3Phase and 220 VAC, 50 Hz
Power
2.0 H.P.
Compressed Air
Filtered, Oil Free 4kg/cm2 provided by customer only
Filtered, Oil Free 4kg/cm2 provided by customer only
Vial Height
75mm Maximum
Voltage
220 Voltage
Humidity
Below 30%
Phase
3Phase
Electrical
415VAC
Country of Origin
Made in India
Brand
LODHA
The Monoblock Dry Syrup Powder Filling & Rubber Stoppering Machine is suitable for round vials with a maximum speed of 120 vials per minute. Special machine construction in a fully stainless steel finish, including the machine frame structure. Machine with built-in turntablesat infeed and outfeed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with powders are made from SS316 materials. The machine is equipped with a single-head, single-track, eight-port powder wheel, which works on vacuum and air systems to fill powder in vials, with an online vibrator-type rubber stoppering system. The stopper inserting system operates in a continuous mode with the synchronised speed of the machine.
Special Features:
No Vial - No Fill System
Separate Variable Speed Drive for Powder Hopper
The hopper can be completely dismantling for easy cleaning
Minimum residue of Powder in the hopper at the end of the batch, resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in turntables with separate drives for speed control of infeed and outfeed of vials
Various safety features, including a clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
Vial Linear Filling Rubber Stoppering The Capping Machine is a compact model used for filling and rubber stoppering of injectable vials. The machine outputs 40 vials per minute when all products are finished and look good, like the vial, rubber stopper & aluminium cap. If the quality of the vial, rubber stopper & aluminium cap is the worst, then speed is considered actual.
Process Operation: The operator loads vials in the infeed platform, and then it will be moved in the turntable. The vials will pass on from a single track to a conveyor, then the vials will be transferred to the filling nozzle of the machines by use of a star wheel. After filling vials, move for the rubber stoppering unit to close the vial mouths, and lastly, move for the aluminium capping unit for capping the vial, then move to collection by conveyor. The speed of this machine can be maintained by AC drive.
Salient Features:
No Vial - No Fill System, No Vial - Machine Stop System
No Stopper - Machine Stop System
Synchronized movement of Vial and Filling Nozzle, no stoppage of vial during filling operation
Vacuumetric Rubber Stoppering System.
All contact parts made of SS 316 material with easy removal system for Auto-Claving/Sterilization/Cleaning
Aseptic Powder Filling Machine, LI-PVF is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation.
Special Features:
No Vial - No Fill System
All contact parts made of SS316 material with easy removal system for AutoClaving/Sterilization
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantling for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
Automatic Injectable Powder Filling with Rubber Stoppering Machine is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure.
Injectable Powder Filling & Rubber Stoppering Machine is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure. Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Powders are made from Ss316 Materials. The Machine is equipped with Single Head Single Track Eight Port Powder wheel, which works on Vacuum and Air Systems to Fill powder in Vials, with on-line Vibrator type Rubber Stoppering system, The stopper inserting system operates in a continuous mode with synchronized speed of machine.
Special Features:
No Vial - No Fill System
Separate Variable Speed Drive for Powder Hopper
Hopper can be completely dismantling for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
+/- 1% Depending upon the Powder, under the controlled level of Humidity
Driven Type
Electric
Application
Pharmaceutical
Weight
475 Kilograms
Power Source
Electric
The Automatic Vial Powder Filling Machine is suitable for round glass vials with a maximum speed of 120 vials per minute. Machine Model LI-PVF construction in stainless-steel finish, including machine frame structure as per cGMP standards.
Machine with built-in turntablesat infeed and outfeed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Powders are made from SS316 Materials. Special Features:
No Vial - No Fill System
All contact parts made of SS316 material with easy removal system for AutoClaving/Sterilization
Machine contstruction in SS304 material
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantle for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Specifications:
Model No.
LI-PVF 4
Vial Diameter
25mm to 38mm
Vial Height
75mm Maximum
Rubber Stopper Diameter
20mm
Filling Range
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Accuracy
±1%
Humidity
Below 30% Rh required on machine to be arrange by customer
Electrical
415VAC 3Phase and 220 VAC Single Phase Power Supply (50 Hz) with A.C. Drive
Power
2.0 H.P.
Compressed Air
Filtered, Oil Free 4kg/cm2 provided by customer only
The dry syrup powder filling line includes an airjet vial & bottle cleaning machine, a dry powder filling machine, an inspection conveyor, capping machine, sticker labeling machine, induction capping machine, etc.
The Airjet & Vacuum Cleaning Machine is a compact and highly efficient machine with an elegant look. The principle of the machine is very simple & unique. It applies compressed air through jets & also applies a vacuum to suck out the particles inside the bottle for effective cleaning. A cleaning chamber is provided to safeguard the product from cross-contamination with the help of compressed air applied through a jet and also sucks dust particles through a vacuum chamber.
The Dry Syrup Powder Filling and Capping Machine is a monoblock machine which is designed to fill dry syrup powder in glass or plastic round bottles and cap them on the same machine. The filling station follows a vacuum- and air pressure-based powder wheel system which transmits powder further into rotating funnels which keep vibrating for smooth flow of powder inside the bottle.
The Automatic Bottle Sticker Labelling Machine is durable, efficient and easy to operate. This is a linear motion sticker labelling machine used for radial or partial warp or overlap labelling on vials, bottles and other round containers. It is equipped with a container separator system to synchronise the container speed with the label length. It gives good labelling accuracy and can handle different sizes of vials, bottles or other round containers without any change parts.
LODHA offers Automatic Vial dry powder filling rubber stoppering machine Model LI-PVF, which is intermittent motion micro powder dosing machine for dosing sterile powders at mechanical speeds of Up to 240 Vial per minute. The powders are filled into Glass Vial using a distinctive vacuum -pressure dosing system. After that, the glass vials are sealed with a rubber stopper.
Special Features:
No Vial - No Fill System
All contact parts made of SS316 material with easy removal system for AutoClaving/Sterilization
Machine contstruction in SS304 material
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantle for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
No Stopper - Machine Stop System
Low Air - Machine Stop System
Low Vacuum - Machine Stop System
Specification:
Model No.
LI-PVF 4
Vial Diameter
25mm to 38mm
Vial Height
75mm Max.
Rubber Stopper Diameter
20mm
Filling Range
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Accuracy
+/- 1% Depending upon the Powder, under the controlled level of Humidity
Humidity
Below 30% Rh
Electrical
415VAC 3Phase and 220 VAC, 50 Hz
Power
2.0 H.P.
Compressed Air
Filtered, Oil Free 4kg/cm2 provided by customer only
High-speed rotary dry syrup powder filling with a rubber stoppering machine is suitable for glass, plastic, PET, HDPE and LDPE bottles with a maximum speed of 60 to 120 bottles per minute depending on powder fill volume, type of powder, bottle diameter and bottle neck diameter. Machine in Stainless Steel Finish with a heavy-duty frame structure with S.S. cladding. All parts coming in contact with powders are made from SS316 materials as well as HDPE funnels.
The machine works on proven, time-tested vacuum and air systems to fill powder in bottles, achieving higher speed and higher accuracy. A machine with unique Bottle Lifting and Neck Holding system avoid spillage of powder on bottle shoulder, neck and body, keeps bottle clean and also avoid wastage of powder
Special Features:
No Bottle - No Fill System
Rotary Bottle Movement System with Rotary Funnel System
Funnel with a unique vibratory system for filling semi-free-flow powder at higher speed
All contact parts with easy removal system for cleaning/autoclaving/sterilisation
Automatic Infeed and Exit of Bottles through Star Wheel System
No Bottle at infeed conveyor - Automatic Machine on/off system
Low Air - Machine Stop System
Low Vacuum - Machine Stop System
Toughened Glass Safety Cabinet*
Blower for dust extraction
Technical Specifications:
Model No.
LI-DP 12
LI-DP 16
Bottle Diameter
Up to 85mm*, Square or Rectangular bottles can be used
Bottle Height
100mm* Maximum
Fill Range
5gms. To 70gms. In Single Dose with the help of change parts for different fill volume
Fill Accuracy
+/- 1 to 2% Depending upon the Powder, under the controlled level of Humidity
Humidity
Below 30% Rh required on machine to be arrange by customer
Electrical
415VAC 3Phase and 220 VAC, 50 Hz
Power
2.0 H.P. For Machine and 3.0 H.P. For Vacuum Pump
Compressed Air
Filtered, Oil Free 2kg/cm2 provided by customer only
Dry Injection Powder Filling Machine is suitable for round glass Vials with maximum speed of 120 Vials per minute. Machine construction in Stainless-Steel finish including machine frame structure as per cGMP standards.
Special Features:
No Vial - No Fill System
All contact parts made of SS316 material with easy removal system for AutoClaving/Sterilization
Machine contstruction in SS304 material
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantle for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Filling Accuracy of +/- 1% depending on powder at controlled humidity below 30% Rh
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
No Stopper - Machine Stop System
Low Air - Machine Stop System
Low Vacuum - Machine Stop System
Heavy Duty mounting system for Powder Wheel for Trouble Free long-term operation
Dry Powder Filling Machine For Pharmaceuticals is suitable for Round Vials with maximum speed of 120 Vials per minute. Specially Machine construction in fully Stainless Steel finish including machine frame structure. requirements.
Dry Powder Filling Machine For Pharmaceuticals Special Features:
No Vial - No Fill System
Separate Variable Speed Drive for Powder Hopper
No Crossover Contamination during Charging of Powder due to new Design of Powder Hopper
Hopper can be completely dismantling for easy cleaning
Minimum residue of Powder in Hopper at the end of batch resulting in less wastage of powder
Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for setting
Tool Less change over for Powder Hopper and Well Agitator
Built in Rubber Stoppering System
Multiple dosing system with the help of change parts
Built in Turn Tables with Separate Drive for speed control of infeed and outfeed of vials
Various safety features including Clutch system for Vial Breakage
Machine Bottom with all over minimum clearance of 6” Height
Moving conveyor above the top plate maintaining proper gap for meeting current application needs.
Automatic Infeed and Exit of Vials
Powder Hopper for charging with better position and design without crossing the line.
No Stopper - Machine Stop System
Low Air - Machine Stop System
Low Vacuum - Machine Stop System
Heavy Duty mounting system for Powder Wheel for Trouble Free long term operation
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Output
Upto 120 Per Min
Brand
LODHA
Country of Origin
Made in India
Sterile Powder Filling Machine is suitable for Round Vials with outout of 120 Vials per minute. Specially Machine construction in fully stainless steel finish including machine frame structure. Sterile Powder Filling Machine with built-in Turn Tables at In-feed and Out-feed with individual drives to match the speed of incoming and outgoing vials for smoother operation. All parts coming in contact with Powders are made from Ss316 Materials. Sterile Powder Filling Machine is equipped with Single Head Single Track Eight Port Powder wheel, which works on Vacuum and Air Systems to Fill powder in Vials, with on-line Vibrator type Rubber Stoppering system, The stopper inserting system operates in a continuous mode with synchronized speed of machine. Machines also come in various options like Single Track Double Powder Wheel, Double Track Double Powder Wheel, Single Track Single Powder Wheel and Double Track Single Powder Wheel System to match the customers customised requirements. Special Features:No Vial - No Fill SystemAll contact parts made of SS316 material with easy removal system for AutoClaving/SterilizationMachine construction in SS304 materialSeparate Variable Speed Drive for Powder HopperNo Crossover Contamination during Charging of Powder due to new Design of Powder HopperHopper can be completely dismantling for easy cleaning Tool Less adjustment of Doctor Blade and Wiper Blade saves valuable time and easy for settingFilling Accuracy of +/- 1% depending on powder at controlled humidity below 30% RhMultiple dosing system with the help of change partsBuilt in Turn Tables with Separate Drive for speed control of infeed and outfeed of vialsVarious safety features including Clutch system for Vial BreakageMachine Bottom with all over minimum clearance of 6” Height
Technical Specification
Model No.
LI-PVF 4
Vial Diameter
25mm to 38mm
Vial Height
75mm Max.
Rubber Stopper Diameter
20mm
Filling Range
50mg. To 1.5 gms. In Single Dose, 1.5 gms. To 6 gms. In Double, Triple and Four Dose system
Accuracy
+/- 1% Depending upon the Powder, under the controlled level of Humidity
Humidity
Below 30% Rh
Electrical
415VAC 3Phase and 220 VAC, 50 Hz
Power
2.0 H.P.
Compressed Air
Filtered, Oil Free 4kg/cm2 provided by customer only
